Creative Worldwide
Support

This download is a driver providing Microsoft® Windows® XP SP2 support for your Creative Modem Blaster. For more details, read the rest of this web release note.

This download supports the following device only:

• Creative Modem Blaster V.92 Serial DE5621

Install this driver to enjoy the full features of your device in Windows XP.

Requirements:

• Microsoft Windows XP Service Pack 2 (SP2) 

Notes:

• To install the driver:
  1. Download the <DE5621_PCDRV_US_2_04_00_00_XP32.exe> file onto your local hard disk.
  2. Double-click the downloaded file.
  3. Follow the instructions on the screen.

This download is a driver providing Microsoft® Windows Vista™ 32-bit support for your Creative Modem Blaster. For more details, read the rest of this web release note.

This download supports the following device only:

• Creative Modem Blaster V.92 Serial DE5621

Install this driver to enjoy the full features of your device in Windows Vista.

Requirements:

• Microsoft Windows Vista 32-bit

Notes:

• To install the driver:
  1. Download the <DE5621_PCDRV_US_2_00_10_50_Vista32.exe> file onto your local hard disk.
  2. Double-click the downloaded file.
  3. Follow the instructions on the screen.

This download is a driver providing Microsoft® Windows® XP Professional x64 support for your Creative Modem Blaster. For more details, read the rest of this web release note.

This download supports the following device only:

• Creative Modem Blaster V.92 Serial DE5621

Install this driver to enjoy the full features of your device in Windows XP.

Requirements:

• Microsoft Windows XP Professional x64 Edition 

Notes:

• To install the driver:
  1. Download the <DE5621_PCDRV_US_2_00_10_50_XP64.exe> file onto your local hard disk.
  2. Double-click the downloaded file.
  3. Follow the instructions on the screen.

This download contains an improved version of the firmware found on your ZEN Vision:M™. It improves the stability of your player during startup. For more information, read the rest of this web release note.

Note: If your current firmware version is 1.10.04, this new firmware may require you to retransfer any existing DRM-enabled tracks back to your player. For more information, see "Notes" below.

Requirements:

• Microsoft® Windows® XP Professional x64 Edition, Windows XP (Service Pack 1 or later), Windows XP Media Center Edition 2004 or later
• Windows Media Player 10 or later
• AudibleManager® version 5.00 or later for Audible® audio content playback
• USB 1.1 port
• Creative ZEN Vision:M 60 GB

Notes:

• To check your player's firmware version number
  
  1. Turn on your player.
  2. From the main menu, select System -> Information.
     The firmware version number is indicated under "Version".
• To install this firmware
  1. Download the file into your local hard disk.
  2. Close all application windows that are currently running on your computer.
  3. Connect your player to your computer.
  4. Double-click the downloaded file and follow the instructions on the screen.

• When your player restarts after installing this firmware, the following will occur for the first time only:
  • The Rebuilding Library screen will appear.
  • Photos may take slightly longer than normal to appear.
• If the firmware version checked above was 1.10.04, and your player has playback issues with DRM-enabled tracks, launch the file transfer software to delete the existing DRM-enabled tracks on your player and retransfer DRM-enabled tracks to your player.
• Should you reinstall an earlier firmware version (1.20.02 or earlier) after installing this firmware, you need to retransfer any existing photos back to your player.
• This firmware supports the playback of Audible Type 2 and 4 tracks.
  Important: to transfer Audible content, you must have AudibleManager version 5 or later installed. AudibleManager allows you to download, burn, organize, transfer and listen to Audible audio content. Download AudibleManager from www.audible.com/software.

This download contains an improved version of the firmware found on your ZEN Vision:M™. It improves the stability of your player during startup. For more information, read the rest of this web release note.

Note: If your current firmware version is 1.50.02, this new firmware may require you to retransfer any existing DRM-enabled tracks back to your player. For more information, see "Notes" below.

Requirements:

• Microsoft® Windows® XP Professional x64 Edition, Windows XP (Service Pack 1 or later), Windows XP Media Center Edition 2004 or later
• Windows Media Player 10 or later
• AudibleManager® version 5.00 or later for Audible® audio content playback
• USB 1.1 port
• Creative ZEN Vision:M 30 GB

Notes:

• To check your player's firmware version number
  1. Turn on your player.
  2. From the main menu, select System -> Information.
     The firmware version number is indicated under "Version".
• To install this firmware
  1. Download the file into your local hard disk.
  2. Close all application windows that are currently running on your computer.
  3. Connect your player to your computer.
  4. Double-click the downloaded file and follow the instructions on the screen.

• When your player restarts after installing this firmware, the following will occur for the first time only:
  • The Rebuilding Library screen will appear.
  • Photos may take slightly longer than normal to appear.
• If the firmware version checked above was 1.50.02, and your player has playback issues with DRM-enabled tracks, launch the file transfer software to delete the existing DRM-enabled tracks on your player and retransfer DRM-enabled tracks to your player.
• Should you reinstall an earlier firmware version (1.60.01 or earlier) after installing this firmware, you need to retransfer any existing photos back to your player.
• This firmware supports the playback of Audible Type 2 and 4 tracks.
  Important: to transfer Audible content, you must have AudibleManager version 5 or later installed. AudibleManager allows you to download, burn, organize, transfer and listen to Audible audio content. Download AudibleManager from www.audible.com/software.

Added Features or Enhancements:

• Supports Microsoft® Windows Vista™.
• Improves keyboard support.
• Improves file browsing in My Recordings mode.
• Simplifies audio source selection in Video Recording and Motion Detection modes.

Requirements:

• Windows Vista, Windows® XP Professional x64 Edition or Windows XP (Service Pack 2)
• DirectX® 9.0 and above
• Any of the following:
  - Creative Live! Cam Optia AF
  - Creative Live! Cam Optia
  - Creative Live! Cam Voice
  - Creative Live! Cam Video IM Pro (VF0230)
  - Creative Live! Cam Video IM (VF0350)
  - Creative Live! Cam Video IM (VF0220)
  - Creative Live! Cam Vista IM (VF0260)
  - Creative Live! Cam Notebook Pro (VF0400)
  - Creative Live! Cam Notebook Pro (VF0250)
  - Creative Live! Cam Notebook (VF0470)
  - Creative WebCam Live! Motion
  - Creative WebCam Live! Ultra
  - Creative WebCam Live! Ultra for Notebooks
  - Creative WebCam Vista

Notes:

To install this software,

• Download the LCC_PCAPP_LA_2_02_05.exe into your local hard disk.
• Double-click the downloaded file and follow the instructions on the screen.

This download is a beta driver providing Microsoft® Windows Vista™ support for your Creative WebCam Live!® Motion. For more details, read the rest of this web release note.

Take note of the following:

• THIS IS AN UNSUPPORTED BETA DRIVER. There is no technical support for this driver. We recommend that only experienced users install this driver. Do not install this driver for critical tasks.
• For best compatibility under Windows Vista, we recommend users to install the latest version of Live! Cam Center software.

Requirements:

• Windows Vista
• Creative WebCam Live! Motion

Notes:

• To install this driver
  1. Download the WCLM_PCDrv_US_1_11_02_BETA.EXE file into your local hard disk.
  2. Double-click the downloaded file and follow the instructions on the screen.

This download contains the Creative Smart Recorder application for Microsoft® Windows Vista™. For more details, read the rest of this web release note.

Smart Recorder

Smart Recorder manages and performs all your recording tasks easily. With Smart Recorder you can:

• detect silences between audio tracks in analog content and automatically record the content in separate files.
• remove hisses and pops in your recorded material using the Audio Clean-up feature.
• schedule recordings to start automatically.
• set the optimum recording level with the automatic source level analysis feature.

Requirements:

• Microsoft Windows Vista 64-bit or Windows Vista 32-bit
• Windows Media® Player
• Creative Sound Blaster® X-Fi™ audio device

Notes:

• To install the file
  1. Download the SMARTREC_PCAPP_LB_2_40_20.exe file onto your local hard disk.
  2. Close all other Windows applications.
  3. Double-click the downloaded file.
  4. Follow the instructions on the screen.

This download contains an improved version of the firmware found on your Creative Xmod. It enables monitoring of line-in recordings. For more information, read the rest of this web release note.

Added Features or Enhancements:

• Enables you to hear what you are recording from the Xmod Line-in jack.

Requirements:

• Microsoft® Windows Vista™, Windows® XP Professional x64 Edition, Windows XP (Service pack 2 or later), Windows XP Media Center Edition 2004 or later
• 256 MB RAM
• USB 1.1 port
• Creative Xmod

Notes:

• To install this firmware
  1. Download the file into your local hard disk.
  2. Close all application and Windows Explorer windows that are currently running on your computer.
  3. Connect your device to your computer.
  4. Double-click the downloaded file and follow the instructions on the screen.
     WARNING: Do not disconnect your device while the firmware is being updated.
     For Windows XP users
     When the Hardware Installation window appears, click the Continue Anyway button.
  5. Restart your computer when prompted.

Requirements:

• Mac OS® X version 10.4
• USB port
• Creative Xmod

Notes:

• To install this firmware
  1. Download the XMOD_MACFW_US_1_08_070516.dmg file into your local hard disk.
  2. Close all applications that are currently running.
  3. Connect your device to your computer.
  4. Double-click the downloaded file and follow the instructions on the screen.
     If you see an error message, click the OK button to install the firmware again.
• After upgrading the firmware, disconnect and reconnect your Xmod.