Creative Worldwide
Support

This package is an update for the Sound Blaster Extigy for users running Windows 98SE, Windows ME, Windows 2000 and Windows XP. The package will update the following:

• Sound Blaster Extigy Drivers (Update to V5.12.01.0038)
• Sound Blaster Extigy Firmware (Update to V1.1.020507)
• Creative Audio Mixer (Update to V2.01.15) reative Diagnostics (Update to V2.20.14)

Requirements
An existing Sound Blaster Extigy software package must be installed before installing this update. In order to utilise the additional features in this driver revision, it will be necessary to install the firmware update (V1.1.020507) (SBFlash.exe) that is included in the file download.

Special Instructions
Before you attempt to upgrade the firmware for your device, be sure that:

• You have already installed the Sound Blaster Extigy software package in your computer.
• You have connected Sound Blaster Extigy to your computer.
• No other applications are running or active in your computer.

While the upgrade is installing, do not:

• Disconnect Sound Blaster Extigy.
• Start up any other application.

Fixes

• Cakewalk SONAR 1.3.1 (Trial Version) detection of Sound Blaster Extigy as monaural device
• Wave Volume level changing to the default level after forwarding, rewinding or muting the track in Audio
• Mixer while playing back AC3 files.
• EAX On/Off button in PlayCenter responds correctly to remote control
• Fader and Center speaker volume in Audio Mixer is accessible after headphones are disconnected.
• Updating drivers in Windows XP no longer requires a system restart.
• Speaker configuration setting is saved after the restart.
• Improved 3D audio processing.

Added Features

• Enabled compressed AC3 pass-through for output to an external decoder.
• Added Bass Management Configuration
• Sample Rate Conversion engine has been improved to allow playback of 24bit/96KHz files through the 16bit/48KHz engine.
• Added Firmware version information in the Audio Control.
• Added DirectSound Voice Management in WinXP.

Firmware V 1.1.020507

• Added AC3 pass-through
• Added Bass Management Configuration
• Improved CMSS playback quality.
• Improved device recognition on system startup.

Hide Details »

This package is an update for the Sound Blaster Extigy for users running Windows 98SE, Windows ME, Windows 2000 and Windows XP.

This release will update the following software titles:

1. PlayCenter 3 (V3.01.22 to V3.01.23)
2. RemoteCenter (V1.40.14 to V1.40.15)
3. Recorder (V2.00.22 to V2.00.24)
4. Mixer (V2.01.11 to V2.01.12)

Requirements
An existing installation of the above software titles must be installed before installing this update.

Note :-
PlayCenter 3 (V3.01.23)
- Device selection issues corrected
- VCD detection under Player view corrected

RemoteCenter (V1.40.15)
- Previous track playback enabled.
- Corrected Track 4/5 display error
- Device selection issues corrected to accurately show preferred playback device.
- Corrected last track playback issues on audio CDs
- Corrected loopback of music files when DREAM is off
- Corrected pause that occurred when fast forwarding or rewinding .WMA files

Recorder (V2.00.24)
- Corrected Fast User Switching in Windows XP
- Device selection issues corrected

Mixer (V2.01.12)
- Under Recording Properties, the advanced controls selection box is now disabled when it is not applicable. Hide Details »

English only - Uniquement en anglais - Solo in Inglese - Sólo en inglés - Nur auf Englisch - Enkel in het Engels

This web release is a standalone package of Sound Blaster Live! 5.1 meant for existing 5.1 card users who have lost their installation CD. (For Windows 95, 98/98SE and Millennium). Supported models are the SB 0060.

This release also includes the following Creative Audio software suite (English only) :

• Creative Surround Mixer (Windows 95, 98, and Millennium)
• Creative AudioHQ (Windows 95, 98, and Millennium)
• Creative Installer 1.00.07 (Windows 95, 98, and Millennium)

Hide Details »

This is a new driver update for Modem Blaster V.90 ISA (Model DI5660) for users running on Windows XP only.

This release was tested on Modem Blaster V.90 ISA (Model DI5660 - Chipset 2890) and includes the latest driver (ver 5.43.049).

Please refer to the readme file for instruction on installing the updated driver. Hide Details »

This is a stand-alone web update of Video Blaster MovieMaker (Beta version) for users running on Windows 98/98SE, Windows Millennium, Windows 2000 and Windows XP only.

This release supports Windows XP (non-WHQL certified) and includes Video Blaster MovieMaker setup program and drivers.

Note: This is a BETA release, as such Technical Support is not available.

Please refer to the README.TXT file for more information. Hide Details »

This is the latest stand-alone driver release of Video Blaster WebCam 3/Plus for users running on Windows 98/98SE, Windows Millennium, Windows 2000 and Windows XP only.

This release includes updated drivers setup and installer and is WHQL certified. It has been tested on Video Blaster WebCam 3 USB and Video Blaster WebCam Plus cameras.

Please refer to the README.TXT file for more information. Hide Details »

This is a new release of Modem Blaster V.90 External (English) for users running on Windows XP only.

This release includes the Supervoice patch for Modem Blaster V.90 External(DE5625), and is only applicable to users of Creative Modem Blaster V.90 External (Model DE5625) with the English version of Supervoice v2.2i installed in Windows XP using one of the following installation CD:

• ME56-CDCLA-1-US
• ME56-CDCLA-2-US
• ME56-CDS1D-1-US

Note: This installation requires the following Disks mentioned above.

This release was tested on Modem Blaster V.90 External(DE5625).

Please refer to the README.TXT file for more details. Hide Details »

Revision: MF56-WEBUP-1-US

This is a stand-alone driver update for the Modem Blaster Flash56 (English) for users running Windows ME or Windows XP.

This release includes:
*Drivers for both Windows ME and Windows XP
*This release was tested on Modem Blaster Flash 56 (Model DI5601).

Note:
It automatically detects the operating system prior to installation.

Please refer to the README.TXT file for instructions on installing this driver update. Hide Details »

This is a stand-alone driver update for the Modem Blaster Flash56 PCI (Model DI5630-5 for users running Windows XP. This release includes Windows XP support It has been tested on Modem Blaster Flash56 PCI (Model DI5630-5). Note:To update your drivers, uncompress the files into a temporary directory and refer to the instructions in the readme file. Please refer to the README.TXT file for more information. Hide Details »

This is a stand-alone driver update of Video Blaster WebCam Go for users running on Windows 98/98SE, Windows Millennium, Windows 2000 and Windows XP only.

This release was tested on Video Blaster WebCam Go, and includes the following:

• Supports downloading of files in Cam Memory mode.
• Improved support in Windows XP when connecting and disconnecting the camera while WebCam Go Control is still running.

Please refer to the README.TXT file for more information. Hide Details »