Solution ID: 127652

Sound BlasterX H5: Changing earcup cushion
Keywords/keyphrases: Sound, BlasterX, H5, cushion, leather, lining, groove, change, earcup, ear, cup, align, fitted, snug


  • Applicable To: Sound BlasterX H5
  • This article shows how to remove and wear an ear cup cushion.
  1. To remove an ear cup cushion, pinch and slowly lift up the leather edges.

  2. Slowly lift up the leather edges along the ear cup until it is completely removed.

  3. The ear cup cushion is completely removed with the inner lining of the ear cup cushion shown.

  4. The picture shows the memory foam of the ear cup cushion.

  5. To put on the ear cup cushion, align the inner leather of the cushion with the grooves along the ear cup.

  6. Repeat the procedure until all the inner lining of the leather is aligned to the groove.

  7. Wriggle the ear cup cushion until it is properly fitted and snug into position.

Last Updated: October 6, 2015

If you require further assistance, please send an email to technical support.

Note: Product specification, technical or troubleshooting information are subjected to change. This is due to changes and/or updates in the new firmware/driver releases. Please refer to the web release notes in the download section for details.


Was this information helpful?

Your feedback is essential for us to constantly refine our Knowledgebase articles to better support you.
Please take a moment to rate our case.

- Your feedback is received anonymously, and thus cannot be responded to.
Excellent        Good        Average        Poor        Bad