Solution ID: 127675

Sound BlasterX H5/H3/P5: Connecting splitter cable
Keywords/keyphrases: Sound, BlasterX, H3, H5, P5, splitter, cable, mic, microphone, headphone out, green, pink, 3.5mm, jack, plug, computer

Summary:

  • Applicable To: : Sound BlasterX H5, Sound BlasterX H3, Sound BlasterX P5
  • This article shows how to connect the headset to the audio splitter cable.

1. To connect the Sound BlasterX H5/H3/P5 to a computer, the bundled splitter cable is required.


2. Align the 4-pole plug of the Sound Blaster H5/H3/P5 to the 4-pole jack of the splitter cable as shown.


3. Secure the connection by making sure the plug is fully inserted.


4. Connect the other end of the splitter cable to the Headphone Out (green) and Mic In (pink) of the computer's audio device.



Last Updated: October 6, 2015

If you require further assistance, please send an email to technical support.

Note: Product specification, technical or troubleshooting information are subjected to change. This is due to changes and/or updates in the new firmware/driver releases. Please refer to the web release notes in the download section for details.

     

Was this information helpful?

Your feedback is essential for us to constantly refine our Knowledgebase articles to better support you.
Please take a moment to rate our case.

Note:
- Your feedback is received anonymously, and thus cannot be responded to.
Excellent        Good        Average        Poor        Bad