Solution ID: 130250

Sound Blaster JAM: Earcup Cushion Dimensions
Keywords/keyphrases: foam earcup cushion, diameter, dimension, JAM


  • Applicable To: Sound Blaster JAM (GH0300)
  • This article provides information about replacing a suitable earcup cushion.

The earcup cushion is removable and it can be replaced by any third party earcup cushion of the same dimension.

It would be more accurate to replace the earcup cushion based on the earcup diameter and not on its cushion.

The earcup diameter is approximately 57mm (2.24 inches) which can be measured with a ruler or a vernier caliper.

For your reference, the diameter of the inner and the outer earcup cushion is approximately 44mm (1.73 inches) and 67mm (2.64 inches) respectively.

Last Updated: April 05, 2017

If you require further assistance, please send an email to technical support.

Note: Product specification, technical or troubleshooting information are subjected to change. This is due to changes and/or updates in the new firmware/driver releases. Please refer to the web release notes in the download section for details.


Was this information helpful?

Your feedback is essential for us to constantly refine our Knowledgebase articles to better support you.
Please take a moment to rate our case.

- Your feedback is received anonymously, and thus cannot be responded to.
Excellent        Good        Average        Poor        Bad