Solution ID: 132262

BlasterX Senz3D: Windows Detection
Keywords/Keyphrases: device manager, sound properties, sound, audio, microphone, default, windows 10

Summary:

  • Applicable to: BlasterX Senz3D (VF0810)
  • The article shows how Windows detects the BlasterX Senz3D camera when it is connected to a PC.

Once the BlasterX Senz3D camera is connected to the PC, it can be detected in the Windows Device Manager under Imaging Devices and Sound, Video, and Game controllers.

The following product listings will appear under Imaging Devices:

Intel(R) RealSense(TM) Camera SR300 Depth:

Intel(R) RealSense(TM) Camera SR300 RGB:

Intel(R) RealSense(TM) Camera SR300 Virtual Driver:

Besides the camera feature, the BlasterX Senz3D has a dual microphone array that can be detected by Windows Device Manager.

To set the BlasterX Senz3D as the default microphone in Windows, go to the Sound Properties > Recording tab.


  Select the Microphone Array and click on the Set Default button.

Last Updated: June 8, 2016

If you require further assistance, please send an email to technical support.

Note: Product specification, technical or troubleshooting information are subjected to change. This is due to changes and/or updates in the new firmware/driver releases. Please refer to the web release notes in the download section for details.

     

Was this information helpful?

Your feedback is essential for us to constantly refine our Knowledgebase articles to better support you.
Please take a moment to rate our case.

Note:
- Your feedback is received anonymously, and thus cannot be responded to.
Excellent        Good        Average        Poor        Bad