Creative Worldwide
Support

This is a firmware upgrade for your NOMAD® MuVo® NX player. For complete functionality, confirm that you meet the requirements listed below before installing this update.

Important: You must install NOMAD MuVo NX Driver version 1.01.02 before installing this firmware upgrade, regardless of the Windows® operating system you are using. Please note that having to install drivers for your NOMAD MuVo NX player in Windows XP, Windows 2000 and Windows Millennium (Me) is unique to this firmware upgrade. Typically, only Windows 98 Second Edition (SE) users have to install drivers for their NOMAD MuVo NX players to function properly.

Added Features or Enhancements:

• Supports the playback of WMA tracks with DRM (Digital Rights Management) content protection. These tracks can be played after being transferred from Creative MediaSource or Windows Media Player to your NOMAD MuVo NX player. Important: To transfer WMA tracks with DRM content protection to your player, you must have NOMAD MuVo Pack (version 1.02.06 or later) for Creative MediaSource installed.
• Enables you to format your MuVo NX player in Windows Explorer using the FAT16 or FAT32 file system.
• Adds Chinese Simplified and Korean language support.
• Supports the display of Russian (Cyrillic) ID3 tag information for MP3 and WMA files in your player. NOMAD MuVo Pack (version 1.02.06 or later) for Creative MediaSource must be installed for full and correct functionality.

Fixes:

• Resolves the issue where voice recordings are not saved when your player's battery level is low.

Requirements:

• Microsoft® Windows XP, Windows 2000, Windows Me or Windows 98 SE
• USB port, version 1.1 or 2.0
• NOMAD MuVo NX player
• NOMAD MuVo NX Driver version 1.01.02 already installed
• NOMAD MuVo Pack (version 1.02.06 or later) for Creative MediaSource

Notes:

• This firmware update only works with NOMAD MuVo NX players. Do not install this upgrade to a NOMAD MuVo or NOMAD MuVo TX player.

• To install this firmware upgrade, do the following:
1. Transfer all files from your player to your computer before installing the firmware upgrade.
2. Connect your player to your computer while pressing and holding the Play button. Keep the Play button depressed for 10 seconds after the player is connected to your computer. After releasing the Play button, a dialog box may appear, prompting you to install a Player Recovery Device driver. Follow the onscreen instructions to complete the device driver installation.
3. Once the Player Recovery Device driver installation is complete, double-click the firmware upgrade .EXE file.
4. When the NOMAD MuVo NX Firmware Download dialog box appears, click the Start button.
5. Follow the onscreen instructions to complete the upgrade.
6. Disconnect your player.

This is a firmware update for all NOMAD MuVo® players. You can also install this update to upgrade your NOMAD MuVo's firmware to play back Audible audio content. For complete functionality, confirm that you meet the requirements listed below before installing this update.

New Features or Enhancements

• Enables you to format your player in Windows Explorer using the FAT16 or FAT32 file system.
• Supports the playback of WMA, WMA version 9 and Audible tracks with DRM (Digital Rights Management) content protection. Important: To transfer WMA tracks with DRM content protection to your player, you must have NOMAD MuVo Pack (version 1.02.06 or later) for Creative MediaSource installed. To transfer Audible audio content with DRM content protection, you must have AudibleManager® installed.
• Improves track organization and playback with two-tier directory structure.
• Enables audio feedback when skipping forward or backward.
• Improves playback of WMA files.

Requirements

• Microsoft® Windows XP, Windows 2000, Windows Me or Windows 98 SE
• Available USB port (version 1.1 or higher)
• NOMAD MuVo Driver version 1.00.04.250 installed
• NOMAD MuVo Pack (version 1.02.06 or later) for Creative MediaSource

Note

• To install this firmware upgrade, do the following:

1. Transfer all files from your player to your computer before installing the firmware upgrade.
2. Connect your player to your computer while pressing and holding the Play button. Keep pressing the Play button for 10 seconds after connecting the player to your computer.
3. Release the Play button. A dialog box appears, prompting you to install a Player Recovery Device driver.
4. Follow the onscreen instructions to complete the device driver installation.
5. Once the Player Recovery Device driver installation is complete, double-click the firmware upgrade .EXE file.
6. When the NOMAD MuVo Audible Firmware Download dialog box appears, click the Start button.
7. Follow the onscreen instructions to complete the upgrade.
8. Disconnect your player.

This firmware update provides improvements to your Sound Blaster Wireless Music Remote Control and Receiver. Be sure to download and install Creative Sound Blaster Wireless Music Software Upgrade version 1.20.02 as well, to enjoy full functionality.

New Features or Enhancements

• Increases the number of artists and albums available for selection on the remote control.
• Enables the direct selection of receivers and adjustment of remote frequency settings using the remote control.
• Adds Sleep mode, which reduces power consumption. The Receiver unit goes into Sleep mode after the Power button on the remote control is pressed.
• Reduces the period of silence between tracks in multiple track playback.

Fixes

• Increases the responsiveness of the receiver and remote control.

Requirements

• Microsoft® Windows® XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition.

Note

• If you already have Creative Sound Blaster Wireless Music Firmware Upgrade version 1.20.02 installed in your device, you can also download this firmware update to increase the responsiveness of the receiver and remote control.

With Face Tracking, your camera automatically zooms in on your face during any video recording or capturing session. You can use Face Tracking in PC-CAM Center or in any instant messaging application that allows video messaging.

Using color detection technology that locks on to skin tone, your camera zooms in on and frames your face in real time. Your camera also frames all faces if there is more than one face in your camera's field of view.

New Features or Enhancements

There are no new features or enhancements.

Fixes

There are no new fixes.

Requirements

Fixes

Requirements

• For Microsoft Windows XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition users.

Note

• Refer to the Readme.txt file included in this update for installation instructions.

This update upgrades your player's firmware.

Fixes:

• Supports the display of Russian (Cyrillic) ID3 tag information for MP3 and WMA files in your player. NOMAD Jukebox 2/3/Zen Pack (version 1.01.12 or later) for Creative MediaSource is necessary for full and correct functionality.
• Extends your player's language support options to include Chinese Traditional and Korean languages

Requirements

• Microsoft® Windows® XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition (SE)
• Creative NOMAD Jukebox Zen NX player
• USB port 1.1 or later

Note

• To install the firmware update, double-click the firmware update file and follow the instructions on the screen.

Fixes:

• Removes distortion (popping sound) during DVD playback on selected motherboards.
• Ensures WinDVD continues to respond when Video Hardware Acceleration is enabled.
• Enables Bit Accurate Recording through SPDIF-IN.
• Enables signal detection when optical signals are sent to the audio card before the computer is turned on.
• Allows Creative applications to be launched after audio is disabled and then enabled in Device Manager.
• Resolves the system stall and system restart issues that are associated with selected game titles.

Requirements:

• Microsoft® Windows® XP, Windows 2000, Windows Me (Millennium Edition) or Windows 98 SE (Second Edition)
• Creative Sound Blaster Audigy LS series audio card

This firmware update allows you to use the Creative FM Wired Remote with your Creative NOMAD® MuVo®² (1.5 GB) player. The Creative FM Wired Remote allows you to access the controls of your player without having to take the player out of your bag or pocket. In addition, the Creative FM Wired Remote adds an FM Tuner with up to 32 preset FM channels, and a built-in microphone for voice recordings.

This firmware update also extends the language display capability of your Creative NOMAD MuVo² (1.5 GB) player.

Firmware Enhancements:

• Adds support for Creative FM Wired Remote functions (Voice Recording, FM Tuner, and FM Recording). These functions can be accessed from the root menu of your player or via the Mode button on the Creative FM Wired Remote.
• Shifts the Folder (Root) and Playlist options to the root menu for improved accessibility.
• Adds Chinese Simplified and Korean language support.
• Supports the display of Russian (Cyrillic) ID3 tag information for MP3 and WMA files in your player. NOMAD MuVo² Pack (version 1.01.10 or later) for Creative MediaSource is necessary for full and correct functionality.

Fixes:

• Resolves the issue where SmartScan is activated when it is not required.
• Single-byte Katakana characters are now displayed correctly.

Requirements:

• Microsoft® Windows® XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition
• USB port, version 1.1 or 2.0
• Creative NOMAD MuVo² (1.5 GB) player

Notes:

• To install the firmware update, double-click the firmware update file and follow the instructions on the screen. Do not transfer files or perform other player tasks before, and during, the firmware update.

• To enable FM support for the Japan region (76-90 MHz):
1. In the root menu of your player, browse to the Settings option and press MENU.
2. Browse to the Language option and press MENU.
3. Scroll through the available languages and select Japanese (in Kanji characters).

• FM and voice recordings are stored in the VOICE folder on your player. The VOICE folder can be accessed from your computer when the player is connected to your computer's USB port.

• This firmware update only works with NOMAD MuVo² (1.5 GB) players. Do not install this update if you own a NOMAD MuVo² player in a different storage capacity.

This firmware update allows you to use the Creative FM Wired Remote with your Creative NOMAD® MuVo®² (4.0 GB) player. The Creative FM Wired Remote allows you to access the controls of your player without having to take the player out of your bag or pocket. In addition, the Creative FM Wired Remote adds an FM Tuner with up to 32 preset FM channels, and a built-in microphone for voice recordings.

This firmware update also extends the language display capability of your Creative NOMAD MuVo² (4.0 GB) player.

Firmware Enhancements:

• Adds support for Creative FM Wired Remote functions (Voice Recording, FM Tuner, and FM Recording). These functions can be accessed from the root menu of your player or via the Mode button on the Creative FM Wired Remote.
• Shifts the Folder (Root) and Playlist options to the root menu for improved accessibility.
• Shortens the time taken for the player to load transferred music immediately after the USB cable is unplugged from your computer.
• Adds Chinese Simplified and Korean language support.
• Supports the display of Russian (Cyrillic) ID3 tag information for MP3 and WMA files in your player. NOMAD MuVo² Pack (version 1.01.10 or later) for Creative MediaSource is necessary for full and correct functionality.

Fixes:

• Resolves the issue where SmartScan is activated when it is not required.
• Single-byte Katakana characters are now displayed correctly.

Requirements:

• Microsoft® Windows® XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition
• USB port, version 1.1 or 2.0
• Creative NOMAD MuVo² (4.0 GB) player

Notes:

• To install the firmware update, double-click the firmware update file and follow the instructions on the screen. Do not transfer files or perform other player tasks before, and during, the firmware update.

• To enable FM support for the Japan region (76-90 MHz):
1. In the root menu of your player, browse to the Settings option and press MENU.
2. Browse to the Language option and press MENU.
3. Scroll through the available languages and select Japanese (in Kanji characters).

• FM and voice recordings are stored in the VOICE folder on your player. The VOICE folder can be accessed from your computer when the player is connected to your computer's USB port.

• This firmware update only works with NOMAD MuVo² (4.0 GB) players. Do not install this update if you own a NOMAD MuVo² player in a different storage capacity.

Fixes:

• Resolves playback issues that occur when Repeat or Random mode is selected in Windows 2000 with Hyper-Threading systems.
• Resolves the playback issue that occurs when your computer returns from Standby mode.

Requirements:

• Microsoft Windows XP or Windows 2000
• Creative PlayCenter version 3.02.67 installed
• Creative Sound Blaster Audigy series audio card installed

Notes:

• To check the version number of your Creative PlayCenter, do the following:
1. Launch Creative PlayCenter.
2. Click File -> About PlayCenter.
3. Check that your Creative PlayCenter application's version number is 3.02.67.
4. Click the OK button.
• If your Creative PlayCenter application is version 3.02.67, you may proceed to download and install the Creative PlayCenter patch.
  If your Creative PlayCenter application is an earlier version, you must download and install the PLC20031009.exe file before installing this Creative PlayCenter patch.
  To locate and install the PLC20031009.exe file, do the following:
1. Go to http://www.creative.com.
2. Click the Support link and select your region.
3. Click the DRIVERS SEARCH or Download Drivers link.
4. Click the Search by file name box and type PLC20031009.exe.
5. Click the Search button.
6. Click the Download Now or Download button.
• To install the patch, double-click the patch file and follow the instructions on the screen.